HAPCAN - Home Automation Project
polski English HARDWARE -> RS232C INTERFACE
stat4u

open source program
open source hardware
general public license v3

RS 232C INTERFACE
UNIV 3.101.0.x

RS 232C interface univ 3.101.1.x
  UNIV 3.101.0.x - pcb UNIV 3.101.0.x - kit UNIV 3.101.0.x - pcb assembled 1 UNIV 3.101.0.x - pcb assembled 2

hardware icon

hardware text
Hardware UNIV 3.101.0.x
- Isolated RS232C interface for HAPCAN system
- This module connects HAPCAN system to PC. It can also work as an controller of devices with serial port
- Works with USB-RS232C adaptors
- Operating of module depends on firmware uploaded into it
 
 

Application Note

722kB

pdf file icon
 

Open Source Hardware
Schematic, PCB design and Labels

GitHub

open source hardware
firmware icon

firmware text
Firmware UNIV 3.101.0.0 [rev0]
- It is used to configure system using HAPCAN Programmer
- It sends transparently all messages form serial port to CAN bus and vice versa
 
 

Firmware Note

345kB

pdf file icon
 

Firmware File*.haf
HAPCAN Programmer

2kB

haf file icon
 

Open Source Firmware

GitHub

open source firmware
Firmware UNIV 3.101.0.1 [rev1]
- Allows quicker module memory reading (reading only up to last occupied memory cell)
- It controls other devices with RS232C serial port
- Allows defining of 128 messages that can control connected device, and another 128 messages as responses of connected device
 
 
 

Firmware Note

459kB

pdf file icon
 

Firmware File*.haf
HAPCAN Programmer

5kB

haf file icon
 

Open Source Firmware

GitHub

open source firmware

 OLDER HARDWARE
old hardware icon UNIV 2.0.1.0
RS232C interface built with UNIV 2.0 processor.
SPECIFICATION
 hapcan.com copyrights