HAPCAN - Home Automation Project
polski English HARDWARE -> RELAY -> UNIV 3.2.1.x
stat4u

open source program
open source hardware
general public license v3

 5A MONOSTABLE RELAY
UNIV 3.2.1.x

5A relay UNIV 3.2.1.x
  UNIV 3.2.1.x - pcb UNIV 3.2.1.x - kit UNIV 3.2.1.x - pcb assembled UNIV 3.2.1.x - pcb assembled

hardware icon

hardware text
Hardware UNIV 3.2.1.x
- Controller of 6 monostable 5A relays
- For DIN rail mounting
- Operating of module depends on firmware uploaded into it
 

Application Note

832kB

pdf file icon
 

PE014012 relay datasheet

227kB

pdf file icon
 

Open Source Hardware
Schematic, PCB design and Labels

GitHub

open source hardware
firmware icon

firmware text
Firmware UNIV 3.2.1.0 [rev3]
- Allows quicker module memory reading (reading only up to last occupied memory cell)
- Firmware for 6 monostable relay module
- 3 control instructions (on, off, toggle)
- 6 timers (1 for each relay) for instruction execution delay 1s-24h
- Allows defining up to 128 CAN messages which can indirectly control the module
- Settable relay power up state
- Transmit (42 messages) and receive (42 messages) FIFO buffers
 
 

Firmware Note

495kB

pdf file icon

Firmware File*.haf
HAPCAN Programmer

5kB

haf file icon
 

Open Source Firmware

GitHub

open source firmware
 hapcan.com copyrights