HAPCAN - Home Automation Project
polski English HARDWARE -> RELAY -> UNIV 3.2.2.x
stat4u

open source program
open source hardware
general public license v3

 5A BISTABLE RELAY
UNIV 3.2.2.x

5A relay UNIV 3.2.2.x
  UNIV 3.2.2.x - pcb UNIV 3.2.2.x - kit UNIV 3.2.2.x - pcb assembled UNIV 3.2.2.x - pcb assembled

hardware icon

hardware text
Hardware UNIV 3.2.2.x
- Controller of 6 bistable relays (6x5A).
- For DIN rail mounting
- Operating of module depends on firmware uploaded into it
 

Application Note

930kB

pdf file icon
 

PE014(A/C)12 relay datasheet

292kB

pdf file icon
 

PE014(F/H)12 relay datasheet

235kB

pdf file icon
 

Open Source Hardware
Schematic, PCB design and Labels

GitHub

open source hardware
firmware icon

firmware text
Firmware UNIV 3.2.2.0 [rev1]
- Allows quicker module memory reading (reading only up to last occupied memory cell)
- Firmware for 6 bistable relay module
- 3 control instructions (on, off, toggle)
- 6 timers (1 for each relay) for instruction execution delay 1s-24h
- Allows defining up to 128 CAN messages which can indirectly control the module
- Settable relay power up state
- Transmit (42 messages) and receive (42 messages) FIFO buffers
 
 

Firmware Note

489kB

pdf file icon

Firmware File*.haf
HAPCAN Programmer

5kB

haf file icon
 

Open Source Firmware

GitHub

open source firmware
 hapcan.com copyrights