HAPCAN - Home Automation Project
polski English HARDWARE -> INFRARED RECEIVER & TRANSMITTER
stat4u

open source program
open source hardware
general public license v3

INFRARED RECEIVER & TRANSMITTER
UNIV 3.5.0.x

Infrared transmitter UNIV 3.5.0.x
UNIV 3.5.0.x - pcb UNIV 3.5.0.x - pcb UNIV 3.5.0.x - pcb assembled UNIV 3.5.0.x - pcb assembled UNIV 3.5.0.x - pcb assembled

hardware icon

hardware text
Hardware UNIV 3.5.0.x
- The module to control AV devices
- Can emits IR signals with carrier frequency up to 500kHz
- Can learn IR codes from original remotes
- Operation voltage 10-24V
- Maximum current consumption 20mA
- For deep back box mounting
- Dimensions 44x44x25 mm
- Operating of module depends on firmware uploaded into it
 
 

Application Note

685kB

pdf file icon
 

Open Source Hardware
Schematic, PCB design and Labels

GitHub

open source hardware
firmware icon

firmware text
Firmware UNIV 3.5.0.3 [rev3]
- Allows quicker module memory reading (reading only up to last occupied memory cell)
- Learns IR codes from original remotes (up to 335 bit long) which have carrier frequency between 27 - 49kHz
- Emits any IR codes with carrier frequency 18 - 500kHz converted from Pronto format
- Has memory for 100 IR learnt or converted from Pronto codes
- Allows defining up to 128 CAN messages which can indirectly control the module
- Transmit (42 messages) and receive (42 messages) FIFO buffers

 
 

Firmware Note

529kB

pdf file icon
 

Firmware File*.haf
HAPCAN Programmer

7kB

haf file icon
 

Open Source Firmware

GitHub

open source firmware

 OLDER HARDWARE
old hardware icon Infrared receivers built with UNIV 1.0 processor.
SPECIFICATION
Infrared transmitter built with UNIV 1.0 processor.
SPECIFICATION
 hapcan.com copyrights