HAPCAN page top

polski

English

 

 

DEVICES -> DIMMER

 

 

DIMMER

for inductive loads

 

Hardware UNIV 1.0.6.0

·  300VA dimmer

·  Phase controlled (leading edge)

·  Suitable for inductive loads: inductive transformers, brushed motors

·  Operation voltage 10-24V.

·  Current consumption from the bus 12mA.

·  For DIN rail mounting.

·  Dimensions 90x58x53 mm (6 mod)

 

Application Note

363kB

Firmware UNIV 1.0.6.11

·  7 control instructions 

·  3 blocking instructions

·  Dimming control in 256 steps (0-255)

·  Possibility to set up minimum and maximum value

·  Soft start feature

·  1s-20h timer for instruction execution

·  Allows to set up 128 conditions for receiving bus messages

·  Settable power up value

·   Allows writing notes in processor memory.

 

Firmware Note

156kB

Firmware File [rev0]

4kB

 

 

DIMMER

for resistive and capacitive loads

 

 

Hardware UNIV 1.0.6.2

·  300VA dimmer

·  Phase controlled (trailing edge)

·  Suitable for resistive and capacitive loads: incandescent lamps (classic and halogen 230V), dimmable electronic transformers

·  Operation voltage 10-24V.

·  Current consumption from the bus 12mA.

·  For DIN rail mounting.

·  Dimensions 90x58x53 mm (6 mod)

 

Application Note

428kB

Firmware UNIV 1.0.6.22

·   Dimming control in 256 steps (0-255)

·   Soft start feature

·   Dynamically settable minimum and maximum values

·   Dynamically settable dimming time value

·   10 control instructions

·   3 blocking instructions

·   1s-20h timer for instruction execution

·   Allows to set up 96 messages that can toggle the module

·   Settable minimum, maximum values and dimmer state after power loss

·   2 working modes: with state memory and without state memory

·   Allows writing notes in processor memory.

·   Uptime counting

·   Mains frequency measurement

·   Self health check

·   Receive and transmit FIFO buffers for CAN

 

Firmware Note

411kB

Firmware File [rev3]

5kB