HAPCAN - Home Automation Project based on CAN protocol
polski English START


stat4u

ABOUT
These pages are about Open Source Hardware and Software Home Automation Project based on Controller Area Network HAPCAN. These pages give information how to create your own home automation system. Here you can find device schematics, firmware and PC software to program and control the system. The system is also available as fully assembled devices at online shop. HAPCAN OPEN SOURCE SOFTWARE HAPCAN OPEN SOURCE HARDWARE

hapcan low energy consumption modules energy efficiency
 HAPCAN MODULES CONSUME LOW ENERGY

touch panelback box touch button din rail button bistable relay back box button RGB LED controller blinds controller
TOUCH PANEL
8mA@24V
(0.2W)

 (with 6 LEDs turned on - 18mA)
DIN RAIL BUTTON
12mA@24V
(0.3W)
BISTABLE RELAY
8mA@24
(0.2W)

 (even with 6 relays turned on)
BACK BOX BUTTON 14mA@24V (0.35W)
(with 14 LEDs turned on - 40mA)
RGB LED CONTROLLER
8mA@24V
(0.2W)
(max. 26mA)
BLINDS CONTROLLER
8mA@24V
(0.2W)
(max. 56mA)

NEWS
19th August 2017 oprogramowanie hapcan HAPCAN PROGRAMMER 3.49
Allows quick module memory reading. The memory is not read in whole, but only up to the last used memory cell. The address of this memory cell is given by new firmware.
At the moment firmware with new feature is available for:
 - din rail button UNIV 3.1.0.0 - rev1 
 - touch button UNIV 3.1.2.1 - rev1
 - back box button UNIV 3.1.3.0 - rev1
 - monostable relay 5A UNIV 3.2.1.0 - rev1
 - monostable relay 16A UNIV 3.2.3.0 - rev2
 - bistable relay 5A UNIV 3.2.2.0 - rev1
 - bistable relay 16A UNIV 3.2.4.1 - rev1
 - monostable relay 6A UNIV 3.2.5.0 - rev1
 - infrared receiver/transmitter UNIV 3.5.0.3 - rev3
 - dimmer UNIV 3.6.0.1 - rev1
 - blind controller UNIV 3.7.0.0 - rev1
 - RGB LED controller UNIV 3.8.0.0 - rev1

HAPCAN Programmer
  infrared receiver/transmitter INFRARED RECEIVER/TRANSMITTER - NEW FIRMWARE
Allows quick module memory reading
Infrared receiver/transmitter
12th August 2017 touch button 6 TOUCH BUTTONS - NEW FIRMWARE
Allows quick module memory reading and buttons deactivation
6 touch buttons
12th June 2017 14 buttons BACK BOX 14 BUTTONS - NEW FIRMWARE
Allows defining line type: input only, output only, input/output
Back box 14 buttons
26th March 2017 6 monostable 6A relay 6A MONOSTABLE RELAY MODULE - NEW DEVICE
6 channel 6A relay module in 3 mod enclosure
6A Monostable Relay

Project started in January 2004. Last update: 19 August 2017.
ABOUT PROJECT | HARDWARE | SOFTWARE | SHOP | CONTACT | HAPCAN FORUM | FACEBOOK | GITHUB