Devices UNIV 3 There are 16 products.

Showing 1 - 16 of 16 items
  • 40.00 zł

    The module is used for connecting power from power supply unit to the system CAN bus. It also allows connecting two power supply units to the bus.

    40.00 zł
    In stock
  • 45.00 zł

    The kit of Touch Panel for Touch Button - UNIV 3.1.2.x module. The Touch Panel fits into GIRA 55 system blank (eg. GIRA no. 026803).

    45.00 zł
    In stock
  • 80.00 zł

    The 8-channel DIN rail button module - UNIV 3.1.0.x. This module allows connecting up to 8 buttons or other devices with voltage free contacts. Device is available in several different versions for the self-assembly or as an assembled unit.

    80.00 zł
    In stock
  • 65.00 zł

    The kit of Back Box Touch Button for HAPCAN system. This module allows connecting up to 6 touch sensors and 6 LEDs. It measures temperature as well. The kit doesn't contain panel with touch sensors. Available in several different versions for the self-assembly or as an assembled unit.

    65.00 zł
    In stock
  • 65.00 zł

    The kit of Back Box Button for HAPCAN system. This module allows connecting up to 14 buttons and 14 LEDs. It measures temperature as well. Available in several different versions for the self-assembly or as an assembled unit.

    65.00 zł
    In stock
  • 150.00 zł

    The kit of RS232C Interface UNIV 3.101.0.x for HAPCAN system. This module connects HAPCAN system to PC (in order to programme the system) and also can be used to control other devices with serial port (needs different firmware installed). Available in several different versions for the self-assembly or as an assembled unit.

    150.00 zł
    In stock
  • 160.00 zł

    The kit of Ethernet Interface UNIV 3.102.0.x for HAPCAN system. This module connects HAPCAN system to computer network. The Ethernet port is used. Available in several different versions for the self-assembly or as an assembled unit.

    160.00 zł
    In stock
  • 135.00 zł

    The UNIV 3.2.1.x module of 6-channel 5A monostable relays with change-over contact . It uses a standard relay (monostable) that the closure of the contacts need to be continuously powered. Available in several different versions for the self-assembly or as an assembled unit.

    135.00 zł
    In stock
  • 280.00 zł

    The module UNIV 3.2.2.x of six 5A bistable relays. Functionally bistable relay module isn't different from monostable relay module, but consumes few times less energy. Available in several different versions for the self-assembly or as an assembled unit.

    280.00 zł
    Out of stock. You can buy it anyway. Delivery within 6 weeks.
  • 190.00 zł

    Module of 6-channel 16A monostable relays UNIV 3.2.3.x. It uses a standard relay (monostable) that the closure of the contacts need to be continuously powered. Available in several different versions for the self-assembly or as an assembled unit. This is a version with 100A inrush current relays.

    190.00 zł
    In stock
  • 220.00 zł

    Module of 6-channel 16A bistable relays UNIV 3.2.4.x. Functionally bistable relay module isn't different from monostable relay module, but consumes few times less energy. Available in several different versions for the self-assembly or as an assembled unit. This is a version with 100A inrush current relays.

    220.00 zł
    In stock
  • 165.00 zł

    Module of 6-channel 6A monostable relays UNIV 3.2.5.x. It uses a standard relay (monostable) that the closure of the contacts need to be continuously powered. Available in several different versions for the self-assembly or as an assembled unit. This is a version with 10A inrush current relays.

    165.00 zł
    In stock
  • 60.00 zł

    The kit of Infrared Receiver & Transmitter for HAPCAN system. This module controls AV equipment and other that can be controlled with infrared remote. It also can be used as IR sensor for the system. Available in several different versions for the self-assembly or as an assembled unit.

    60.00 zł
    In stock
  • 125.00 zł

    The llight dimmer UNIV 3.6.0.x. The dimmer is designed for resistive and capacitive loads: 230V classic, halogen and LED lamps or low voltage lamps with electronic transformers. Available in several different versions for the self-assembly or as an assembled unit.

    125.00 zł
    In stock
  • 165.00 zł

    Module of 3-channel blind controller for AC motors 230V 200VA. Available in several different versions for the self-assembly or as an assembled unit.

    165.00 zł
    In stock
  • 130.00 zł

    The RGB LED controller UNIV 3.8.0.x. It can control one RGB LED or three single color LEDs.Available in several different versions for the self-assembly or as an assembled unit.

    130.00 zł
    In stock
Showing 1 - 16 of 16 items