

|
UNIV 3 CPU PROCESSOR
This is a microcontroller of HAPCAN system. Can be used
to build one of the system nodes. The processor comes with programmed
HAPCAN UART/CAN bootloader, which allows firmware to be loaded through
the serial port or system bus. |
Processor datasheet
|
485kB
|
 |
UNIV 3 CPU processor
Online Shop
|
 |
|
UNIV 3 MODULE
This is a universal module of HAPCAN system. Can be used
to build one of the system nodes. It needs just a few external
components to create sensor, actuator or interface of HAPCAN system.
The module comes with programmed HAPCAN UART/CAN bootloader, which
allows firmware to be loaded through the serial port or system bus. |
Module datasheet
|
558kB
|
 |
Open Source Hardware
Schematic, PCB design
|
GitHub
|
 |
UNIV 3 module
Online Shop
|
 |
|

 |
PROCESSOR BOOTLOADER
|
Bootloader 3.4 Note
|
1.92MB
|
 |
|
Bootloader 3.4 - source code
allows PIC18F26K80 processor programing
|
GitHub
|
 |
|
FIRMWARE TEMPLATE
Templates are used for writing processor firmware in the Microchip's
MPLAB environment. |
Firmware project template file for assembly language
|
26kB
|
 |
Firmware project template file for C language
(author Marcin)
|
14kB
|
 |
FIRMWARE FILE CONVERTER
Converts MPLAB *.hex file
into the Home Automation Firmware file *.haf |
HAPCAN Converter 3.1 - Windows application
needs NET Framework 4
|
450kB
|
 |
HAPCAN Converter 3.1 - source code
Visual C++/CLI 2012
|
48kB
|
 |
HAPCAN Converter - console application
(author Marcin)
|
13kB
|
 |
HAPCAN Converter - source code
Visual C++ 2012 (author Marcin)
|
11kB
|
 |
|
OTHER FILES
Library of component used
in the schematics and pcb designs |
EAGLE HAPCAN library [01/2017]
|
343kB
|
 |
|