
 |
Hardware UNIV 3.102.0.x
- Ethernet interface for HAPCAN system. This module connects HAPCAN
system to computer network. The Ethernet port is used
- Uses Tibbo miniature programmable Ethernet EM500 module
- Supports 10/100BaseTX
- Supports auto-MDIX
- Build in Real Time Clock
- Operating of module depends on firmwares uploaded into it (Tibbo
and UNIV 3 firmwares)
|
Application Note
|
744kB
|
 |
|
Tibbo Device Explorer [ver5.03.04]
Tibbo utility application
|
462kB
|
 |
|
Open Source Hardware
Schematic, PCB design and Labels
|
GitHub
|
 |
|

 |
Firmware for Tibbo module -
univ_3-102-0-x_tibbo_EM500_v2.3
- Supports up to 14 simultaneous connections from Ethernet
to HAPCAN bus
|
Tibbo Firmware Note
|
806kB
|
 |
|
Tibbo Firmware File *.bin
Tibbo Device Explorer
|
245kB
|
 |
|
Open Source Firmware
|
GitHub
|
 |
|

 |
Firmware UNIV 3.102.0.0 [rev1]
- It sends all messages form Ethernet to CAN bus and vice
versa
- Translates up to 128 CAN frames into ASCII Ethernet messages
- Translates up to 128 text messages received from Ethernet into
CAN frames
|
Firmware Note
|
367kB
|
 |
|
Firmware File*.haf
HAPCAN Programmer
|
2kB
|
 |
|
Open Source Firmware
|
GitHub
|
 |
|
Firmware UNIV 3.102.0.1 [rev3]
- It sends all messages form Ethernet to CAN bus and vice
versa
- Supports RTC (real time clock)
- It has events schedule
|
Firmware Note
|
783kB
|
 |
|
Firmware File*.haf
HAPCAN Programmer
|
6kB
|
 |
|
Open Source Firmware
|
GitHub
|
 |
|