BLIND CONTROLLER 4 channel

for AC motors

Hardware UNIV 1.0.7.1

·  4-channel blind controller for two-phase AC motors 230V 500VA

·  Hardware protection against connecting two phases to the motor at the same time.

·   Nominal motor voltage 230V-250V

·   Maximum load for one channel 500VA

·  Operation voltage from the bus 10-24V

·  Current consumption from the bus 15mA

·  For DIN rail mounting

·  Dimensions 90x58x106 mm (6 mod)

Application Note

855kB

Firmware UNIV 1.0.7.1 - rev 1

·  6 control instructions

·  3 blocking instructions

·  Can distinguish and react to 128 messages received from the bus

·  4 timers 1s-20h timers for instruction execution

·  Possibility to define maximum motor running time.

	Firmware Note	133kB
	Firmware File [rev1]	4kB

Firmware UNIV 1.0.7.1 - rev 2

·   Same as UNIV 1.0.7.1 - rev 1 except:

·   Allows to set up 96 conditions for receiving bus messages - (conditions 97-128 set under previous firmware won't work)

·   Self health check

·   Receive and transmit FIFO buffers for CAN

Firmware File [rev2]

5kB