PDM

Post Reply
Zrat
Posts: 1
Joined: 25 Nov 2019, 15:54

PDM

Post by Zrat »

,
Last edited by Zrat on 02 Dec 2019, 09:09, edited 2 times in total.
Jacek
Posts: 559
Joined: 17 Feb 2007, 18:00

Re: PDM Module

Post by Jacek »

Please have a look here (https://hapcan.com/devices/universal/un ... pdm1_a.pdf) at chapter 4.3 It shows you what the bus wiring can be done when using the pin header. Remember that 120 Ohm terminators can be used only at the end of the bus.
Regards
Jacek
Post Reply